Invictus Installation Manual V2.1.25.3
Page 3
© 360 Vision Technology Ltd.
1 Safety and Precautions
1. Please read these notes before attempting to operate the 360 Vision Invictus Hybrid, and keep for future
reference.
2. DO NOT disassemble or remove covers. This will break the water seals and invalidate the warranty.
3. All servicing and repairs must be handled by 360 Vision Technology.
4. Avoid pointing the camera directly towards a bright light source (sunlight), or expose the camera to intensive
light situations as this may damage the camera pick-up device.
5. Installation should be carried out by suitably qualified personnel, in accordance with local codes of practice
and regulations.
6. 360 Vision Technology Limited accept no liability for any damage caused by incorrect or improper installation.
7. To prevent risk of injury caused by the Invictus Hybrid or mounting options becoming detached, fit a suitable
safety chain or lanyard.
8. Use only 360 Vision Invictus Hybrid power supplies. These have suitable terminals for all the wires in the
Invictus composite cable.
9. Please handle the Invictus Hybrid with care, as improper handling may cause damage within this unit.
2 Housing Dimensional Drawing
MUST NOT BE REPRODUCED OR SHOWN TO
DO NOT SCALE
ALL DIMENSIONS IN MM
REMOVE ALL SHARP EDGES
SHEET:
D
C
B
A
D
C
B
A
4
3
2
1
4
3
2
1
A3
DESCRIPTION
SCALE:
PERMISSION OF THE AUTHOR.
ANY THIRD PARTY WITHOUT THE DIRECT WRITTEN
C COPYRIGHT PROTECTED AND
THIS DRAWING AND ALL COPIES ARE
PART NUMBER:
1.000
7 OF 8
TOLERANCES:-
X = 0.5
X.X = 0.1
X.XX = 0.05
A3
3rd ANGLE PROJECTION
360 Vision Technology Ltd.
Unit 7, Seymour Court,
Manor Park, Runcorn, Cheshire,
WA7 1SY. United Kingdom.
www.360visiontechnology.com
260
TILT
SWEEP
R411
497
457
125
MOUNTING BASE
10 (x4)
ON 101.6 (4 INCH) PCD
237
338 PAN SWEEP
460
18
100
NAME:
M3100-D
CENTURION ASSEMBLY
ISS DATE
REFERENCE
D 161115
SHEET ADDED
161115
DATE :
K.CRAIK
RELEASED:
APPROVED:
ENGINEER:
MATERIAL:
FINISH:
HMA WITH LIGHTS
SCALE 0.300
M20 CABLE GLAND
(NOT SUPPLIED)
MOUNTING
BASE
M20 BLANKING
PLUG (SUPPLIED)
(x3) M8x25 HEX BOLT
M8 SPRING WASHER
M8 PLAIN WASHER
M8 FIBRE WASHER
(SUPPLIED)
SCALE 0.300
Weight 9kg
Invictus HMA with LED Array