Invictus Installation Manual V2.1.25.3
Page 29
12.2.3 Advanced Features
The Advanced Features page, offers options to:-
• Camera - Cannot be edited, shows label/name given to the camera.
(See section Video - Camera - page 26).
A ‘Preset’ is a stored view. When a preset is defined, it will store the pan, tilt, zoom, focus and iris positions. Use
the up, down left and right buttons to move the camera to the desired position and then use the zoom buttons to
set the image as required.
Set Preset using the following options:-
• Preset - Choose from a list of presets using the drop down box.
• Name - Edit the preset name to suit/help identify the position.
• Type - Options available are:-
Night - Allows different options to be used for the preset that include lamps
(See also Camera - Night Presets page 31)
Simple - For setting a simple PTZ preset, no lamp options.
Wiper - Set the preset to activate the wiper.
Re-Map - Choose which function/preset you want to re-map to the new preset number above.
Tour - Set the preset to start or stop a preset tour.
Mimic - Set the preset to start or stop a mimic tour.
User - Used on systems supporting 360 SDK.
Auxiliary - Can be used to recall an auxiliary command.
(See Interfaces - Auxiliary page 35).
Power - Used to set the pan/tilt motors to use full or part power.
• Function - Function option will change to suit the above type.
• Illumination - Choice of illumination for preset with night presets function enabled. Options are IR,
White Light and off.
• Intensity - Set lamp intensity for the preset using the illumination chosen above.
• Sensor - Presets have the choice of being either colour or mono, when the scene is dark.
• Focus Range - Sets how the camera will focus when in mono. Options are ambient or IR. The Focus
Range setting will set the camera focus, (when in mono) to suit the light source in the scene.
If this is set incorrectly the image may not be in focus, when in mono at night
.
• PTZ - Camera can be set to pan, tilt and zoom or not. This can be used to operate the sensor or lamp
function.
Use the
Seek preset
button to test the preset.
Define preset
button to set the above parameters.
Delete preset
to remove the preset.
