42
SHARPNESS
BRIGHTNESS
ON
4
3
2
1
Chapter 7 Brightness / Sharpness (Colour) Control Switch Settings (continue)
7.2.1 For wire length between 500 to 700 m (1,640 to 2,296 ft.)
– (between the Mixer and
Signal Processor)
The built-in automatic alignment circuitry is designed to provide optimal high quality images
in terms of Brightness and Sharpness (Colour) with all four Control Switches (Dip Switches)
put to “LOWER” positions (ex-factory setting), as shown in Fig. 7.2.1.1. Therefore, no
switch adjustment is required for wire length of between 500 to 700 m (1,640 to 2,296ft.)
when this Signal Processor is with ex-factory setting and used with Mixer Models listed
under paragraph 7.2.
UPPER Position ----->
LOWER Position ---->
Fig. 7.2.1.1
7.2.2 For wire length between 700 to 1,000 m (2,296 to 3,280 ft.)
- (between the Mixer
and Signal Processor)
Depending on the choice of Camera, DVR, and Monitor, the users may wish to adjust the
Sharpness (Colour) and Brightness of the images to suit their particular requirements.
To improve the Sharpness (Colour) and Brightness of the images, put the Control Switches
(Dip Switches) 1 and 2 to “UPPER” position, as shown in Fig. 7.2.2.1.
UPPER Position ---->
LOWER Position---->
Fig. 7.2.2.1
SHARPNESS
BRIGHTNESS
ON
4
3
2
1
