41
SHARPNESS
BRIGHTNESS
ON
4
3
2
1
Chapter 7 Brightness / Sharpness (Colour) Control Switch Settings (continue)
7.1.2 For wire length between 250 to 500 m (820 to 1,640 ft.)
- (between the Mixer and
Signal Processor)
Depending on the choice of Camera, DVR, and Monitor, the users may wish to adjust the
Sharpness (Colour) and Brightness of the images to suit their particular requirements.
To improve the Sharpness (Colour) and Brightness of the images, put the Control Switches
(Dip Switches) 1 and 2 to “UPPER” position, as shown in Fig. 7.1.2.1.
UPPER Position ------>
LOWER Position ---->
Fig. 7.1.2.1
To further improve the Sharpness (Colour) and Brightness of the images, put the Control
Switches (Dip Switches) 1, 2, 3, and 4 to “UPPER” position), as shown in Fig. 7.1.2.2.
UPPER Position----->
LOWER Position--->
Fig. 7.1.2.2
7.2 Control Switch Settings on the following Mixer models for transmission distance
500 to 1,000m. (1,640 to 3,280 ft.)
Push-Fit Mixers:
- PF068B12 Universal Mixer
for 500-1,000m, DC 12V 680mA to camera)
- PF068B24 Universal Mixer
for 500-1,000m, AC/DC 24V 340mA to camera)
Pig-Tail Mixers
- PT068B12 Universal Mixer
for 500-1000m, DC 12V 680mA to camera)
SHARPNESS
BRIGHTNESS
ON
4
3
2
1
