8
Chapter 2
Features of 16 Channels Signal Processor CI-16-ASP-485
1. Video and Power transmission over one pair of UTP Cable or one pair of Bell Cable up to
1.5KM (5,000ft).
2. No expensive coaxial cable is needed.
3. No AC-main power point and No AC/DC adapter are needed for each Camera.
4. One Cat.5 cable can transmit both Power and Video Signals for four different cameras.
5. Maintains high quality Video with excellent interference immunity.
6. With built-in auto adjustment circuitry for various cable lengths to maintain high quality
Video Signals.
7. Much easier installation as compared with systems using coaxial cable.
8. Total cost savings of over 30% on installation as compared with other networking
systems.
9. As the Signal Processor is equipped with a built-in automatic voltage adjustment system,
there is no need to calculate the power line distance between the control centre and the
camera.
10. The Signal Processor is also equipped with built-in automatic-reset fault protection and
surge suppression protection for each channel, and the system is immunized from the
ground-loop effect.
11. Compatible with 2Y-Link Push-Fit or Pig-Tail Mixers.
12. The 2Y-LINK Intelligent Model SIXTEEN Channels Signal Processor – Model
No.CI-16-ASP-485 is also compatible with any DC 12V CCTV Camera up to
8W(680mA) with Video Output 1.0 Vpp 75 Ohm from any makers and produces equally
high quality pictures.
