22
23
2VV.
Creating innovative solutions for you and your business since 1995.
This MENU is available only for units with water heat exchanger
it allows for advanced setting of water heat exchanger reg
-
ulation.
The MENU for setting the blowers when closing and opening
doors. It allows for advanced settings of blower control.
Setting fan power limits for open
doors. Min - Max
The time for which the blower
will be operational from the
moment the desired tempera-
ture is ac0.3°C on the
ROOM sensor in closed door
mode. This setting is available
only when the ROOM regulation
sensor is selected (1616/Tem-
perature sensor)
The set limits on blower power restrict the extent of fan control for open and closed doors. This
restriction is applied to manual and automatic control of blower power. Exceeding limits in any
blower power setting is signalled when the setting element turns red with the text overruns.
Setting fan power limits for
closed doors. Min - Max
Maximum temperature for
return water
Setting periods for
blower movement.
Only at 0:00 time and in
Standby mode.
Minimum water flow
can be set only for
analog control of blower.
MENU - Adv. WATER SETTING
MENU - Adv. fan setting
IC3-EC
IC3-AC5
Display mode of Menu Adv. fan setting for AC5
and EC
Electrical connection - Option 1:
MENU - OTHER SETTINGS
This MENU allows for setting other parameters
Ad 1)
Ad 1)
- Option to set CAN address of control panel such that
up to 2 control panels can be connected to MASTER regulation
Options: CP 1 = control panel has address 1
CP 2 = control panel has address 2
Activation or deactivation of
automatic change
of summer/winter time
CP 1
CP 2
IC
ATTENTION
Each panel must have its own address.
If this is not observed, it can result in improper functioning of the regulator.
When connecting multiple panels it is necessary to set the termination elements. These can be
found on the main electronics and in the control:
Setting termination elements
Example of connecting controllers - Option 1:
63
CANH
A
CANL
GND
+12V
B
A
B
+12V
GND
64
65
66
ON
ON
IC
CP 1
CP 2
63
CANH
A
CANL
GND
+12V
B
A
B
+12V
GND
64
65
66
ON
ON
ON
ON
OFF
OFF
7. CONTROL
