22
23
2VV.
Creating innovative solutions for you and your business since 1995.
MENU Selflearning
Need to set to activate
Selflearnig.
Self-learning - available only in automatic mode and active function
(Auto speed control) optimizes the time when the curtain is in operation even when
the vortex is closed.
Temperature
Time of shutter operation per
minimum rotation of the motor
from closed doors.
Time of shutter operation per
maximum rotation of the motor
from closed doors.
Blower power with open
doors.
The temperature the shutter
attempts to reach with open
doors.
In this menu it is possible to specify which sensor will be active and the temperature the shutter
will attempt to reach after closing doors so as to balance temperature loss.
After reaching the set temperature, the shutter transitions into the selected
automatic/manual mode.
The menu is enabled only in units with water exchanger
MENU - WATER ANTIFREEZE
Settings
(20%-100%)
Ventilation rate with open
doors
(20%-100%)
MENU - SUBUNITS
Use this menu to set the behaviour of the IC-S regulators
connected as SLAVE
Number of SLAVE
regulators:
0 ~ 10
Ad 1)
Ad 2)
Ad 1)
– Use one door contact as main. Its status will be sent to the
SLAVE regulators and it will no longer be necessary to connect it to each
regulator, if required.
Not allowed = the door contact will not transmit to the SLAVE regulator from the MASTER
Allowed = the door contact will transmit to the SLAVE regulator from the MASTER
Ad 2)
– Activates in the main screen the icon to turn
each SLAVE regulator ON/OFF If inactive, all the SLAVE
regulators will be turned on or off simultaneously
Not allowed = The SLAVE regulators are turned on/off simultaneously
Allowed = The SLAVE regulators can be turned on/off individually
form the main screen
Slave address parameter:
ADDRESS
SLAVE UNIT
ADDRESS
SLAVE UNIT
1
1
6
6
2
2
7
7
3
3
8
8
4
4
9
9
5
5
A
10
7. CONTROL
