background image

2

3

2VV.

 Creating innovative solutions for you and your business since 1995.

1. BEFORE YOU BEGIN

For better orientation in the manual, there are various symbols used in the text. The following table shows their portrayal and 

meaning.

Before installation, properly read the manual how to safely and properly use this product.

Symbol

Meaning

ATTENTION!
IMPORTANT NOTICE!
YOU WILL NEED

TECHNICAL INFORMATION

Warning or notice

Important instructions
Practical tips and information

Link to another part of the manual

More technical information

This manual contains instructions for proper installation of the regulation. Before installation of the regulation, please properly 

read the whole manual. The manufacturer reserves the right to make changes, including the technical documentation without 

prior notice. Please save this manual for future use. The service manual is a part of the product.

Conformity declaration

The product has been designed, manufactured, placed on the market, complies with all applicable regulations and is in compli-

ance with the requirements of the directives of the European Parliament and the Council, including amendments to the proposal, 

under which it was classified. Under normal conditions and in the instruction manual for the intended use and installation, it is safe. 

The harmonized European standards referred to in the relevant ES declaration of conformity have been applied in the assessment. 

For the current and full version of the ES Declaration of Conformity, please see www.2vv.cz

Содержание IC-ModBus













Отзывы: