2N Helios IP Vario, Руководство по установке

Страница: 85 / 97

2N TELEKOMUNIKACE a.s., www.2n.cz 85/97
3.4 Intercom Control as Viewed by Internal
User
Call answering
Incoming calls from can be received like any other call. You can 2N Helios IP Force
®
open the lock and activate or deactivate a user or profile during the call using your
telephone numeric keypad. The call duration is limited to avoid unintentional 2N
®
line blocking. Use the Call time limit parameter to set the maximum call Helios IP Force
duration (refer to the Intercom Configuration / Services / Phone / Calls subsection of
Configuration Manual). To prolong a call push the # button on your telephone any
time. A short beep 10 s before the call end signals an automatic all termination.
Calling to Helios IP Vario
2N Helios IP Force
®
allows to answer an incoming call too. To set the required
parameters use the Incoming calls item, refer to the Intercom Configuration / Services
/ Phone / Calls subsection of Configuration Manual.
Code Door Opening (Switch Activation)
2N Helios IP Force
®
is equipped with a door unlocking switch. To activate the switch
enter the valid code (refer to the Intercom Configuration / Hardware / Switches
subsection of Configuration Manual) on the numeric keypad.
Procedure:
Enter the lock 1 or lock 2 activating code using your telephone numeric keypad
and push (confirmation is unnecessary if the Lock code without confirmation
option is selected, refer to the Intercom Configuration / Hardware / Switches /
Advanced subsection of Configuration Manual).
A valid code is announced by acoustic signalling . An invalid code is
announced by acoustic signalling
User Activation and Deactivation
You can activate or deactivate a user and define call routing to the user telephone
numbers using the numeric keypad. For more details refer to the Intercom
Configuration / Directory / Phone Book subsection of Configuration Manual.