2N Helios IP Vario, Руководство по установке

Страница: 74 / 97

2N TELEKOMUNIKACE a.s., www.2n.cz 74/97
Switching to static IP address
4, 4, 4, 5, 5, 6 for 6-buttons models
The acoustic signal indicates mode switching.
Wait until the device is restarted automatically.
Note
The 1, 1, 1, 2, 2, 3 sequence must be entered within 30 seconds after the
first sound signal for security reasons. The inter-digit delay may be 2 s at
most.
The device will have the following network parameters after restart:
IP address – 192.168.1.100
Network mask – 255.255.255.0
Default gateway – 192.168.1.1
Dynamic IP Address Setting
Connect to the power supply (or, disconnect and reconnect it if 2N Helios IP Vario
®
already connected).Follow the instructions below to enable automatic getting of
network parameters from the DHCP server:
Wait for the first acoustic signal
Press following buttons sequentially:
2, 1, 1, 2, 2, 3 for 3-buttons models