manualshive.com logo in svg

2N ATEUS 501106E, Руководство пользователя

Поделиться
Скачать
2N ATEUS 501106E Скачать руководство пользователя страница 40

 

 

38 

6.5.  Remote Programming by PC 

6.5.1.  Remote Supervision Purpose 

Remote supervision allows reading and changing the GSM gateway configuration 
remotely, thus saving time of servicing technicians enabling them to solve some 
problems remotely. For remote supervision, the same GSM software is used as for local 
setting using a serial interface. All features are absolutely identical with the exception of 
the GSM gateway firmware upgrade, which 

cannot be done

 remotely. 

 

6.5.2.  What You Need to Run Remote Supervision 

On client‘s premises: 

1. The GSM gateway must be equipped with a 

SIM card supporting data  transmission

. 

2. The GSM gateway must contain firmware of version 2.36 and up. 
3. Parameters required for remote supervision must be selected in the GSM gateway. 

 

In Supervision Centre:

 

1. You need to know the client‘s GSM gateway service password. 
2. A GSM program of version 1.05 or up must be installed in the PC. 
3. The PC must be equipped with a reliable modem (analog, ISDN, or GSM), or a GSM 

gateway made by 2N, which works in the data mode. If the PC is equipped with an analog 
modem, it has to be connected to a CLIP-sending exchange (calling line identification 
presentation). 

4. The ‚incognito‘ function 

may not

 be activated on the Supervision Centre side. 

 

Important warning! 

Once programmed for remote supervision by selected line, client’s GSM gateway cannot 
receive an ordinary call from this line. The GSM gateway with the said selection regards 
every call containing the Supervision Centre CLIP as a remote supervision attempt. 
Hence, to make such a call, you should use another line or another SIM card, or the 
‚incognito‘ function, or make a call in direction from client’s GSM gateway to the 
Supervision Centre. 

 

Important recommendations 

1. Select a reliable telephone line or SIM card for connection whose number will not be 

changed in the future (will not be renumbered). 

2. You are recommended to use another GSM gateway or a GSM modem rather than a 

fixed line modem to establish connection much more quickly.  

3. The GSM gateway or GSM modem in the Supervision Centre should be equipped with a 

SIM card with a separate number for data connections (necessary if you use remote 
supervision with call-back to a GSM gateway of different operator). 

4. A connection within one GSM network is more reliable than a connection between different 

operators.  

5. If you are forced to use two different operators for remote supervision, read the “Data 

Connection Problems” chapter carefully.  

 

Содержание ATEUS 501106E




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды