2N ATEUS 501106E, Руководство пользователя

Страница: 35 / 67

33
6. Programming
6.1. How to Program
You can program your GSM Gateway in three ways: with a telephone, PC, or remote by PC as
listed in the table below:
Programming method: Phone PC
PC,
remote
Parameters with exception
of I2CR table and SMS texts:
# # # #
*)
# # # #
# # # #
Programming:
I2CR table and SMS texts:
# # # # # # # #
#
# #
#
Reading of all parameters:
# # # # # # # #
Upgrade of GSM Gateway firmware:
# # # #
*) By reason of extended Call Sorting Table, only records 500 to 599 of this table are
programmable by phone. Records A01 to A98 and B01 to B54 are programmable only by PC.
6.2. Before Programming
•
Using the chapter 2.7, make sure, that the GSM Gateway works.
•
Learn the default set-up of programmable parameters. Keep them as they are unless you need
to change them.
•
Decide in which way you will program the GSM Gateway. If you can use a PC, then use it.
Select the most convenient of the initialising files. Open it with the appropriate program, study
the notes therein and change those parameters only that you are not satisfied with.
•
If you use the telephone programming, fill all values to be changed into the parameter table
fields (chapter 7).
•
If the GSM Gateway is not brand-new, make sure that you know the correct service
password. If you are not quite sure, perform the full initialisation!