2N 9135110E, Руководство по установке

Страница: 40 / 77

Installation manual 2N® Analog Vario
40 / 77
•
•
•
•
•
•
3. Function and use
This section describes the 2N
®
Analog Vario configuration.
Here is what you can find in the section:
3.1 Programming
3.2 Full Parameter Chart
3.3 Function Description
3.4 Section for Advanced Users
3.5 Maintenance
3.6 Downloads
3.1 Programming
All 2N
®
Analog Vario parameters, including the keypad ones, are set remotely using any tone-
dialling telephone set (or a mobile phone). First call 2N
®
Analog Vario and enter the
programming mode. The access to this mode is service password protected.
A voice menu is available in the programming mode and so you need not use this manual to
program standard parameters. The menu is stored in
the 2N
®
Analog Vario memory in the
default language. Having entered the full parameter or memory number, you can hear how the
parameter has been programmed, thus checking the programmed numbers for correctness.
All parameters are stored safely in the non-volatile EEPROM memory. The memory capacity does
not limit the count or length of numbers, passwords, etc. This means that altogether 324
memories for 16-digit telephone numbers, 54 Arrival/Departure password memories, 20 switch
password memories, etc. are available.
Entering Programming Mode
You can enter the programming mode only during an incoming call (telephone – 2N
®
Analog
Vario call). The programming barring jumper must not be mounted. To get into the
programming mode, enter the service password in the format password (do not forget
to enter the asterisks before and behind the password!). The service password is 12345 by
default and can be changed ,. If you enter the password correctly, the voice menu is launched.
Now you can start
programming.
•
Tip
Write or print the values to be programmed to minimise the risk of error. Moreover,
this gives you an idea of what you have programmed. Make sure that programming
is not barred (JP1 jumper) – refer to the PCB Description subsection
