2N 9135110E, Руководство по установке

Страница: 15 / 77

Installation manual 2N® Analog Vario
15 / 77
•
•
•
•
•
•
•
•
•
•
•
•
•
Part No. 9134148E
SIEMENS
®
adapter
This adapter is required when connecting to a
Siemens HiPath Telephone system
1.2 Terms and Symbols Used
Terminology
Line pick-up/seizure/off-hook – call start, line locked, busy.
Line hang-up/clear – call end, handset hang-up.
DTMF – dual tone multi-frequency signalling.
PSTN – public switched telephone network.
Outgoing call – 2N
®
Analog Vario -telephone connection made, e.g. by a pressing a
button.
Incoming call – telephone- 2N
®
Analog Vario connection.
Programming mode – 2N
®
Analog Vario programming mode accessible from by dialling
into the intercom only.
Code lock – mode for entering the password for switch 1 or 2 activation using a numerical
keypad.
Telephone mode – you can make a call, dial a number and hang up using the numerical
keypad.
DTMF transmission during call – for outgoing calls only, numbers are tone-dialled by a
numerical keypad button.
Button substitution – the numerical keypad can be used instead of a number pre-stored
under a button memory.