2N 9135110E, Руководство по установке

Страница: 62 / 77

Installation manual 2N® Analog Vario
62 / 77
•
•
•
•
Operation Hang-up Outgoin
g call
Incoming
call
Program
ming Telephon
e mode
Keypad Switch activation –
code lock
× × 1) — — —
DTMF into outgoing
call — × — — Y 2)
Button replacing
(speed dial from
memory) × ×1) — — —
Off-hook by key
(into telephone
mode)
× — — — —
Hang-up by key
— Y1) — — Y
Hang-up by key
— Y1) — — —
Explanatory notes:
Y… Yes, always
× … Yes if this function is programmed
1) This holds if DTMF is disabled during outgoing calls (the corresponding tone is
transmitted in that case).
2) If pulse dialling is selected, it is possible to switch into tone dialling by pressing (but
not vice versa!).
3.4 Section for Advanced Users
Automatic Multiple Number Dialling
When you press a 2N
®
Analog Vario button, you may find out that the called line is busy or the
called party is absent. 2N
®
Analog Vario is able to identify these situations and solve them by
Automatic Multiple Number Dialling if one of three automatic dialling modes is enabled. Up to 6
numbers can be stored for each button.
The three automatic modes (see below) recognise the continuous, busy and ringing tones, In all
of these modes, automatic dialling can be disabled or the required count of cycles can be preset