2N 01368-001, Руководство по установке, Страница: 86 / 107

2N Access Unit Installation Manual
86 / 107
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N
®
Mobile Key
HID SE (Seos, iClass SE, Mifare SE)
Bluetooth Reader
The Bluetooth reader module ( Part No. 9155046 ) helps authenticate and subsequently open
doors using Android and iOS based smartphones via the Bluetooth protocol 4.0 as RFID card
replacement. Install the
2N
®
Mobile Key application from Google Play and Appstore to m ake
authentication work properly. The application requires phones with Android OS 6.0
Marshmallow and higher and iOS 12 and higher.
The module contains two 2N Access Unit bus connectors.
The two connectors are fully interchangeable and can be used both as inputs from the
main unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The package includes a 220 mm long interconnecting cable.
The module uses the 2.4 GHz frequency.
IDs from the following smart phones can be read:
Android 6.0 and higher
iPhone 4S and higher
with iOS 12 and higher
Fingerprint Reader
The Fingerprint reader is used for automated verification of human fingers for access control
and intercom control.
The module contains two 2N Access Unit bus connectors.
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
•
Tip
To accelerate card reading, you are recommended to select the card types used by
the user in the module settings.
