2N 01368-001, Руководство по установке, Страница: 82 / 107

2N Access Unit Installation Manual
82 / 107
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Technical specification:
Resolution: 320 px x 214 px H x V
Resolution slideshow: 214 px x 214 px
Contrast ratio: 400
Brightness: 350 cd/m2
Weight: 280 g
Working temperature:
− 20 °C – 60 °C
Resistance level: IK07
125 kHz RFID Card Reader Module
The 125kHz RFID card reader module ( Part No. 9155032 ) is used for reading RFID card Ids in the
125 kHz band.
The module contains two bus connectors for 2N Access Unit .
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
EM4xxx
13.56 MHz RFID Card Reader, NFC support
The 13.56 MHz RFID card reader ( Part No. 9155040 ) is used for reading RFID card Ids in the
13.56 MHz band.
The module contains two bus connectors.
These two connectors are fully interchangeable and can be used both as inputs from the
main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read (only the card serial number is read):
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N
®
Mobile Key
•
Caution
The display is not supported on Access Unit 1.0 from FW version 2.27.
