2N 01368-001 Скачать руководство пользователя страница 64

Страница: 64 / 107

2N Access Unit Installation Manual

107

PoE power supply

2N Access Unit

is compatible with the PoE 802.3af (Class

0–

12.95 W) technology and can be fed

directly from the LAN via the compatible network elements. If your LAN does not support this
technology, insert a PoE injector, Part No. 91378100,

between

2N Access Unit

and the nearest

network element. This power supply

provides

2N Access Unit

with 12 W for feeding of itself and

the connected modules.

Combined power supply

2N Access Unit

can be fed from an external power supply and PoE at the same time. In this

configuration, the maximum power for the connected modules is available.

LAN Connection

2N Access Unit

is connected to the Local Area Network (LAN) via the UTP/STP cable (Cat 5e or

higher) terminated with a terminal board as shown in the figure below. As the device is equipped
with the Auto-MDIX function, either the straight or crossed cable can be used.

•
•

Caution

We recommend the use of a LAN surge protection.
We recommend the use of a shielded SSTP Ethernet cable.



Содержание 01368-001












































































































Результаты поиска

Содержание 01368-001

Отзывы:

2N 01368-001, Руководство по установке, Страница: 64 / 107

Результаты поиска

Содержание 01368-001

Отзывы: