manualshive.com logo in svg

2in1 BPtele, Руководство пользователя

Поделиться
Скачать
2in1 BPtele Скачать руководство пользователя страница 12

12

1.  Connect the AC adaptor with the AC adaptor jack on the right 

side of the unit.

2. Plug the AC adaptor into the socket. (AC adaptors with re-

quired voltage and current indicated near the AC adaptor 

jack.)

Caution:

1. Please unload the batteries when operating with the AC 

mode for a longer period of time. Leaving the batteries 

in the compartment for a long time may cause leakage, 

which may lead to damage of the unit.

2. No batteries are needed when operating with the AC 

mode.

3. AC adaptors are optional. Please contact the distributor 

USING THE AC ADAPTOR (OPTIONAL)

ee / Measurement error:

 Make sure the L-plug is securely con-

nected to the air socket and calmly measure again. Wrap the 

cuff correctly around your arm and keep arm steady during 

measurement. If the error keeps occurring, return the device to 

your local distributor or service centre.

e1 / air Circuit abnormality:

 Make sure the L-Plug is securely 

connected to the air socket on the side of the unit and calmly 

measure again. If the errors still occur, return the device to your 

local distributor or service centre for help.

e2 / Pressure exceeding 300 mmHg:

 Switch the unit off and 

measure again quietly. If the error keeps occurring, return the 

device to your local distributor or service centre.

e3 / Data error:

 Remove the batteries, wait for 60 seconds, and 

reload. If the error keeps occurring, return the device to your 

local distributor or service centre.

er / exceeding Measurement range:

 Measure again quietly. If 

the error keeps occurring, return the device to your local distrib-

utor or service centre.

ERROR CODES FOR yOUR REFERENCE

Содержание BPtele





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды