Portable N
2
O Source Manual Rev. B-2
4
4) Connect the outlet of the regulator to the N
2
O inlet of the instrument.
Figure 4. Diagram of the N
2
O source properly installed in the mount.
3. OPERATION
Please read all the following information before attempting to use the Portable N
2
O
Source. For assistance, please call 2B Technologies at (303)273-0559 or email us at
Shipping Box Contents
Open the shipping box and verify that it contains the following:
1. Piercing device with integrated pressure regulator and removable insert
2. Regulator mount
3. Two #10-
32x1/2” Phillips head screws with split washers
4. One #10-
32x1” socket cap screw with flat washer
5. Connecting tubing to instrument.
If anything is missing or obviously damaged, contact 2B Technologies immediately.
Position top of regulator assembly so
that the mount clamps down in the
area indicated with arrows.
