247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com
•
Trigger by Motion Mode:
Record video files only when motion is detected. Six
levels of motion sensitivity are available.
•
Trigger by Sensor/Motion: Record video files only when either sensors or motions are
triggered
Up to 20 Min of Pre-record and Post-record can be set for even- triggered recording
OSD (On-Screen-Display) information such as Camera Name, Date, Time, GPS location, or
speed can also be recorded in each frame
Four inputs are available for connecting sensors. Each sensor is assigned with a name,
programmable to trigger special event for recording.
Six Outputs are available to be used as Alarms. Alarms are programmed to link to various
events such as video signal lost, motion detection, video recording, storage running low, over
speed detection etc…End-Users can also define their own alarm states
Recorded Video Files that were marked with event marker button are locked files, and cannot
be automatically deleted when hard drive space runs low,” ring recording”. However,
operators can manually delete these files if necessary
Ring Recording Mode: During recording if hard drive space runs low, oldest video files will be
erased first to clear up space for new video files (Except locked files described above)
Flexible Video Recording Files that can be break by sizes or by time
Allow multiple hard drives to be prioritized as recording devices. DVR400 automatically
scans first available storage device to record video files. The priority sequence is defined by
End-Users in the “Priority Hard Drive” box.
Shut down delay time out is set by operators to delay power-off from system after the
ignition switch is turned off. This feature ensures the system shuts down properly thus
preventing file corruption.
DVR400 keeps track of all events in a log file that records data such as sensor activities,
event marked button activities, video files (Capture Start/Stop), video signal lost, GPS info
etc…
1.3
CLIENT FEATURES
Multiple Channel Screen Pre-view formats: 2x2, 3x3, 4x4 and 1, 2 & 4 channels
Real time remote Preview, Remote Search / Playback, Video Screen Snap Shot
Fast Forward / Backward, Slow Play, Frame by Frame stepping, 10 Seconds jump forward /
backward, and Pause are supported in Play Back Mode
Client Software can remotely configure DVR400 or update software patches, firmware.
Locally Search / Play Back if removable storage device (from DVR400) is connected to local
computer
Convenient coded color bar to retrieve video files by time /date/month in a few clicks. A
calendar is also available to allow users to search files in the month of interest.
User can manually create their video files by “begin – end” time format and upload these
files to their computers
4
