Quality Guarantee Commitment
- 44 -
Adjust running belt to back of treadmill on both sides
running belt and smoothness of running. Repeat steps of adjustment in case of deviation.
4.
Warning! Please don’t tighten the roller excessively! This will cause permanent damage to the
bearing!
You need to tighten the running belt again if the above steps fail to reach the effect.
Lubricating oil
The treadmill is oiled when leaving the factory, but lubricity of treadmill shall be inspected frequently, which
helps to keep it in optimum state. The treadmill must be oiled after 1 year or running for 100h.
Lift one side of the running belt and touch the surface of running platform after running for 30h or 30 days. It is
unnecessary to lubricate if there is silicone oil; if the surface is clearly dry, please oil it as instructed below.
Please use non-petroleum silicone oil
How to oil the treadmill:
1.As shown in the figure, it needs to oil the running belt after the treadmill is used for some time.
Lift one side of the running belt, place the silicone oil bottle below the running belt and apply silicone oil to
running board. (Apply silicone oil to the middle of running board)
2.Turn on the treadmill to run for some time after oiling to uniformly apply silicone oil to running belt.
Note: Stop the treadmill to make the running belt still when oiling the running belt. Lower surface in the
middle of running belt.
Содержание 130T
Страница 12: ...Quality Guarantee Commitment 10 ...