Quality Guarantee Commitment
- 43 -
Adjustment of running belt is equipped with two functions: adjustment of degree of tightness and central
position of running belt. The running belt has been adjusted when leaving the factory, but it will be stretched after
use to deviate from central position to cause damage by wearing trim strip and rear protecting cover. It is normal
to stretch the running belt in use.
Adjust running belt
If the running belt is slip or not smooth when you use the treadmill, you can improve it by adjusting degree of
tightness of running belt.
How to adjust running belt
Insert 5mm hexagon wrench into the regulating screw on the left of running belt, and turn the wrench by 1/4 of
a circle clockwise to regulate the rear roller to tighten the running belt.
Repeat step 1 to adjust the screw on the right. Ensure that the regulating screw is turned by the same distance to
make the rear roller parallel with the frame.
Repeat step 1 and 2 until the running belt is not slip.
Note: the running belt shall not be too tight, which will damage the running belt, roller bearing, etc., increase
pressure of front/rear roller, and bring abnormal sound or other problems. To reduce tension of running belt, please
turn the wrench anticlockwise by same distance on both sides.
Adjust running belt to the middle
When you use the treadmill, the force of feet is different, and pressure on running belt is unbalanced, which makes
the running belt deviate from the center. Such deviation is normal. It will return to the center when nobody is
running on the running belt. You need to adjust it to the center if it fails to return to the center.
1.
Keep the treadmill in no-load running and adjust speed to 6KM/H.
2.
Observe the distance from running belt to left and right edgestrips.
•
If the running belt tilts towards the left, turn the left screw by 1/4 of a circle clockwise
with Allen wrench.
•
If the running belt tilts towards the right, turn the right screw by 1/4 of a circle clockwise
with Allen wrench.
•
If the running belt is still not in the middle, repeat the above steps until it is in the middle.
3.
Adjust speed to 16KM/H after adjusting running belt to the middle, and observe deviation of
Содержание 130T
Страница 12: ...Quality Guarantee Commitment 10 ...
