D-303015
1
KP-140 PG2
Portable Remote Wireless 2-Way Keypad
User’s Guide
1. INTRODUCTION
KP-140 PG2 is a wireless keypad for the PowerG family control
panels. KP-140 PG2 enables the user to arm/disarm the alarm
system, to initiate emergency/fire/panic alarms, to perform one of
the AUX (auxiliary) functions (see Note 4 in Section 6) and to turn
lighting devices on and off. The keypad comprises an RF
transmitter that sends out a differently coded RF signal for each
command. The KP-140 PG2 comprises a proximity reader for
operation with a proximity tag.
The KP-140 PG2 supports an optional partition feature.
Partitioning allows you to have up to three independently
controllable areas with different user codes assigned to each
partition or one user code assigned to up to three partitions. A
partition can be armed or disarmed regardless of the status of the
other partitions within the system.
Note:
Partition refers to the PowerG family control panels that
support the Partitioning feature.
The KP-140 PG2 enables activation of the Aux (Auxiliary), fifteen
home control outputs (X-10), one PGM output, Fire and
Emergency functions. Each button needs to be individually
defined for the AUX, PGM or X-10 functions at the corresponding
points of the "
DEFINE PANEL
" and "
DEFINE OUTPUTS
" menu of
the control panel (refer to the PowerMaster Installer Guide for
specific details).
An "on-board" tamper switch opens when the battery
compartment cover is removed, and an "under-board" tamper
switch opens if the unit is removed from its mounting place.
The main features of the KP-140 PG2 are:
•
Status, alarm memory, and trouble data retrieval from the
control panel
•
Automatic reporting of low battery voltage.
•
Visual indications by red/green LED.
•
Keypad back lighting.
•
Various buzzer sounds in response to specific actions.
•
Back tamper and battery compartment tamper
•
Automatic supervision messages to the control panel.
•
Exit/entry beeps
•
Long-life 4 year (with entry/exit beeps) / 5 year (without
entry/exit beeps) battery life expectancy, 3 VDC lithium
battery.
•
Wall mounting option.
Communication Indications
Description Definition
Red LED lights shortly, then red LED lights 1
sec. and "sad" beep is heard
Failure response
Red LED lights shortly, then green LED
lights 1 sec. and "happy" beep is heard
Success response
Red LED lights shortly and no buzzer sound
is heard.
No communication
with the control
panel
Keypad Buzzer Sound
Description Symbol
Short single beep, upon pressing a button
"Happy" (success) beep
"Sad" (failure) beep
B
A
C
D
E
F
G
H
I
J
K
L
M
A.
HOME
H.
AUX / ENROLLMENT
B.
AWAY
I.
EMERGENCY
C.
DISARM
J.
FIRE
D.
LIGHT
K.
PANIC
E.
PARTITION SELECTION
L.
Buzzer
F.
INSTANT
M.
LED
G.
STATUS / ESCAPE
Figure 1 - External View
2. SPECIFICATIONS
Frequency Band (MHz):
Europe: 433, 868, USA: 915
Modulation:
GFSK.
Antenna:
Built-in antenna
Communication Protocol:
PowerG
Battery type:
3V, CR123A type.
Caution!
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used battery according to manufacturer's instructions.
Battery Life Expectancy:
4 years (with entry/exit beeps) /
5 years (without entry/exit beeps).
Operating Temperature:
0
°
C to 49
°
C (32
°
F to 120
°
F)
Dimensions (LxWxD):
127x70x24mm (5 x 2-3/4 x 31/32 in)
Weight (including battery):
107g (3.4 oz)
Color:
White
Compliance with Standards:
Europe
EN 300220-1, EN 50130-4, EN 50131-1 Grade 2 Class II, EN 50131-3,
EN 301489.
USA
CFR 47 part 15, Canada RSS 210
