0813 IH-1675
PAGE 1 OF 11
π
H-1675
110" AutomAtic
stretcH wrAp
dispenser
1-800-295-5510
uline.com
SYSTem SpecificaTionS
MACHINE DIMENSIONS
Length
99"
Width
60"
Height
129"
Turntable Diameter
59"
Turntable Height from Floor
3"
Wrapping Height
110"
Operation Space
99 x 60 x 129"
Maximum Load Size
52 x 52 x 110"
Approximate Shipping Weight
1,250 lbs
ELECTRICAL SPECIFICATIONS
115 VAC, 60 Hz, Single-phase, 15 AMP
TURNTABLE SYSTEM
20 loads per hour (spiral)
12 RPM turntable maximum speed
4,000 lbs turntable maximum load capacity
FILM CARRIAGE / ELEVATOR SYSTEM
Adjustable raise and lower speeds
Automatic height detection photoelectric
sensor
FILM DELIVERY SYSTEM
Infinite / Manual Stretch Adjustment
10" Diameter Roll Capacity
20" Roll Width Capacity
caUTion! motor control equipment and
electronic controllers are connected to
hazardous line voltages. When servicing
drive and controllers, there may be exposed
components with housings or protrusions at or
above line potential. extreme care should be
taken to protect against shock.
The user is responsible for conforming to all
applicable code requirements with respect to
grounding requirements. Do noT use extension
cords to operate the equipment.
Disconnect ac input power before checking
components, performing maintenance,
cleaning up, and when the machine is not in
use. Do noT connect or disconnect wires and
connectors while power is applied to circuit.
Wiring work should be performed only by
qualified personnel. There is a danger of
electric shock or fire.
WaRninG! Loose clothing must noT be worn
while the machine is in operation. Stay clear
of moving parts while the machine is running.
