1
SCREEN WINCH SYSTEM INSTALLATION MANUAL
FOR SCREENS FROM 300 cm. UP TO 450 cm. of width
(MAR-2022)
Before installing the screen winch system, please read the following instructions carefully:
•
The screen winch system must be used INDOORS ONLY.
•
The screen winch system must be installed by qualified personnel only.
•
AFTER UNPACKING THE SCREEN WINCH TAKE CARE THAT AFTER RELEASING
THE PACKAGING FOAM FROM THE TRACTION STEEL CABLES, YOU HAVE TO
MOUNT THE BEAM UNDER THE STEEL CABLES. THIS IN ORDER TO PREVENT
THAT THE STEEL CABLES RAVEL UP INSIDE THE WINCH HOUSING.
•
NEVER CONNECT MORE THAN ONE MOTOR TO THE SAME SWITCHER. USE THE
SUPPLIED SWITCHER ONLY.
•
NEVER CONNECT SCREEN WINCH MOTOR AND SCREEN MOTOR TO THE SAME
SWITCHER.
•
IN CASE OF MAINTENANCE, UNPLUG THE POWER SUPPLY.
•
In case the SCREEN is controlled via optional interfaces:
-
The optional interfaces has to be supplied by ScreenInt or by a well-known tubular
motor manufacturer
-
Take care that
the control system is programmed so there i≤s no tension on the
interface output for at least 1 sec. during switching between rolling up and rolling
down operations and viceversa.
•
IT IS FORBIDDEN TO OPERATE SCREEN WINCH SYSTEM AND PROJECTION
SCREEN SIMULTANEOUSLY (RISK OF PERMANENT DAMAGES TO BOTH MOTORS).
ACTIVATION OF SCREEN WINCH SYSTEM AND PROJECTION SCREEN:
A – ROLL DOWN
-
ROLL DOWN FIRST THE SCREEN WINCH UNIT TILL THE DESIRED HEIGHT AND CUT
THE POWER TO THE SCREEN WINCH MOTOR.
-
ROLL DOWN THE PROJECTION SCREEN TILL ITS BOTTOM END STOP AND THEN
CUT THE POWER TO THE SCREEN MOTOR.
B – ROLL UP
-
ROLL UP FIRST THE PROJECTION SCREEN AND THEN CUT THE POWER TO THE
SCREEN MOTOR.
-
THEN ROLL UP THE SCREEN WINCH UNIT TILL ITS CLOSED POSITION AND CUT
THE POWER TO THE SCREEN WINCH MOTOR.
•
Incorrect use of the screen winch system, including exceeding the maximum
lifting weight of 60 kg., would be dangerous and invalidates the warranty.
•
Do not try to disassemble the screen winch or to paint the housing, as these
operations will invalidate the warranty. In case you need a different housing colour,
please check with ScreenInt as we have this option available.
•
Half-yearly and yearly the screen winch system has to be checked. Please see
check register at page 10 of this document.
•
In addition to manufacturer inspection guidelines, we recommend you check your
countries own legal obligations for checking and testing of lifting equipment.
•
It is forbidden to stay under the screen winch system.
•
For any repairing, please contact directly the dealer you purchased the unit from.
The manufacturer and his agents do not take responsibility for any damage to property
or personal injury if the winch is installed/used outside of recommended specifications.
This product uses a 230 V AC motor. DO NOT attempt to carry out repairs to
the motor, there are no user serviceable parts.
Incorrect servicing could lead to risk of electric shock. For any repairing, please contact
directly the dealer you purchased the unit from. In the event of a fault please contact
the dealer /supplier. Warranty is 24 months Return To Base.
The screen winch system is
certified.
