Orbit 14 LCD KEYPAD INSTRUCTIONS
INTRODUCTION
The LCD keypad is a visual interface tool that helps you operate the Orbit 14 panel. The operating procedures for the LCD are
based on those of the LED keypad. For full information regarding the operation of the Orbit-14 refer to the Orbit-
manual.
MAIN FEATURES
♦
2-line, 32-character display
♦
Menu driven interface for user functions
♦
2-zone expansion from the keypad
♦
Up to 5 LCD/LED keypads
♦
Custom message display programming
♦
3 emergency keys on keypad
♦
System trouble display
♦
Language support
♦
Double tamper protection (Box & Wall)
♦
Wired panic button
LED DISPLAY
The LCD keypad has four LED indicators as follows:
POWER LED
The Power LED indicates system operation.
ON
The system is operating properly from premises (AC) power; its backup battery is in good
condition.
OFF
The system is inoperative due to lack of power (from both premises AC and backup battery);
servicing is required.
FLASH
Indicates a trouble condition when the system is disarmed.
Note:
If a trouble condition exists, the Power LED will flash only when the system is in its disarmed state. Once the
system is armed, a previously flashing Power LED will light steadily.
ARM LED
The Arm LED indicates whether or not the system's intrusion detectors are armed.
ON
The system's intrusion detectors are
armed
.
OFF
The system is
disarmed.
FLASHING
Indicates that an emergency alarm has been triggered or a burglary or fire is taking place.
READY LED
The Ready LED indicates whether or not the system's intrusion zones are secured and ready to be armed.
ON
All intrusion zones are secure; the system is ready to be armed and no zones are bypassed.
OFF
One or more intrusion zones are not secure and the system is not ready to be armed;
FLASHING
Indicates that the system is ready to be armed with bypassed zones
FIRE LED
ON
A fire alarm or fire emergency is in progress or has recently occurred.
OFF
All fire zones are operating normally.
FLASHING
A fault has been detected in the system's fire zone and needs to be corrected.
USER MENU
Ø
Entering the user menu:
The LCD keypad offers you the option to navigate through the menu structure until you reach your desired function.
