![background image](http://html1.mh-extra.com/html/mio/times-1/times-1_user-manual_1804672001.webp)
LA
P/
RE
SE
T
ST
AR
T/S
TO
P
MODE
LAP/RESET button
creates split laps,
resets values
AM/PM
indicator
Days of the week
Alarm
Date
Mode
MODE button
switches modes
START/
STOP
button
starts or
stops
stopwatch
A.
MIO TIMES 1 AT-A-GLANCE
USEr’S GUIdE
TIMES 1
ACTIVATING YOUr STOPWATCH
If the screen is blank remove the insulation tape from the battery door to activate the unit.
C.
TIMES 1 SET UP
Set the time and date
1. In TIME mode press the MODE button three times,
Tuesday (TU), on the top of the screen should be flashing.
2. Select the data to be changed with the LAP/RESET button.
3. It will first start with the second, use the START/STOP
button to change.
4. When the desired data is found press the LAP/RESET
button to move to the next setting.
The data is entered in the following order:
Seconds C Minutes C Hours C Date C Month C Weekday
Note: When setting the hour go through a full cycle (continue
to press the START/STOP button) to reach 24 hour clock and
the alarm setting will then be in the 24 hour clock as well.
When the desired data has been entered press the MODE
button. To view the date from the time screen press the
START/STOP button.
This guide is also available at www.miowatch.com
B.
MOdES Of OPErATION
time
Shows time and day
•
of the week
StOPWatCh
Displays stopwatch
•
and split times
aLaRm
Set daily alarm
•
time SettinG
Set time
•
Press MODE to move to the next mode.