READ IT
OR
WATCH IT
Read instructions or watch easy-to-follow video.
Scan QR code or visit https://byjasco.com/50021i
50021
PLUG-IN DUAL-OUTLET
DIGITAL TIMER WITH
TETHERED BUTTON
SETUP
1.
If no numbers are visible on-screen, plug timer
into an outlet and charge for 1 hour. Once
charged, press the reset ( ) button in the
lower-right corner using a toothpick or pencil.
2.
Use up ( ) and down ( ) arrows to set the
time — note AM or PM.
Note:
After timer is charged, it can be removed
from the outlet for easy programming. Return to
outlet when finished.
PROGRAMMING OPTIONS
DEFAULT TIMER
Two ON/OFF programs feature default
settings. To activate the default times,
press the
ON TIME
or
OFF TIME
button.
Indicator arrows appear on the display to
show which programs are set. To
deactivate a setting, press the desired
button again.
Note:
Outlets operate simultaneously for
any schedules.
CUSTOMIZED TIMER
Press either
ON TIME
button, then use up ( ) and
down ( ) arrows to set on time. Press the
ON TIME
button again or wait five seconds to store the
program and return to clock display.
Press either
OFF TIME
button, then use up ( ) and
down ( ) arrows to set off time. Press the
OFF TIME
button again or wait five seconds to store the
program and return to clock display.
Note:
An indicator arrow ( or ) appears on-screen
to show which settings are active.
OVERRIDE OPTIONS
Override scheduled programs and manually operate the
connected device(s) using the tethered button or ON/
OFF button below the display screen.
If a scheduled program is running and the device is on,
press either button to turn off the device. The device
remains off until the next scheduled program begins, or
the button is pressed again.
If a scheduled program is running and the device is off,
press either button to turn on the device. It remains on
until the next scheduled program ends, or the button is
pressed again.
When no programs are active, press either button to
turn ON/OFF the device manually.
Supplier Declaration of Conformity | Model #: 50021 | Jasco Products Co.,
10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com
This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS
standards. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from which the receiver
is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
Total ratings for both outlets:
125VAC, 60Hz
15A 1875W general/resistive
5A 625W tungsten
1/2HP motor
Works with all LED and CFL bulbs
FCC/IC - EN
SPECIFICATIONS
AM
CLOCK
ON
TIME
ON
TIME
OFF
TIME
OFF
TIME
ON/OFF
R
SET
RESET
BUTTON
AM
CLOCK
ON
TIME
ON
TIME
OFF
TIME
OFF
TIME
ON/OFF
R
SET
RISK OF ELECTRICAL SHOCK
• PLUG DIRECTLY INTO AN
ELECTRICAL OUTLET
• DO NOT USE IN WET
LOCATIONS
• USE INDOORS ONLY
• UNPLUG TIMER BEFORE
CLEANING
RISK OF FIRE
• DO NOT USE TO CONTROL
APPLIANCES THAT CONTAIN
HEATING ELEMENTS
(COOKING APPLIANCES,
HEATERS, IRONS, ETC.)
• DO NOT EXCEED
ELECTRICAL RATINGS
• DO NOT USE WITH
EXTENSION CORDS
WARNING
AM
CLOCK
ON
TIME
ON
TIME
OFF
TIME
OFF
TIME
ON/OFF
R
SET
6:00PM
6:00AM
5:00PM
ON TIME 1
OFF TIME 1
ON TIME 2
OFF TIME 2
12:00AM
AM
CLOCK
ON
TIME
ON
TIME
OFF
TIME
OFF
TIME
R
SET
AM
CLOCK
ON
TIME
ON
TIME
OFF
TIME
OFF
TIME
R
SET
AM
OFF
TIME
OFF
TIME
ON/OFF
R
AM
OFF
TIME
OFF
TIME
ON/OFF
R
AM
ON
TIME
ON
TIME
OFF
TIME
OFF
TIME
ON/OFF
R
MADE IN CHINA/HECHO EN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 2-year limited warranty. Visit www.byjasco.com for
warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between
7AM-8PM, M-F, Central Time.
©JASCO 2020 | 50021 | 09/21/20 v1
