![background image](http://html1.mh-extra.com/html/hayward/colorlogic-wfclsync/colorlogic-wfclsync_manual_2110775001.webp)
Page 1
ColorLogic
®
RGB LED Sync
WFCLSYNC
Introduction
The Hayward Sync Module is a driver that permits compatibility between Hayward LED Waterfalls (Sheer 500 LED) and
Hayward Universal ColorLogic® LED lights from the same power source (same circuit). The Sync Module will sync with 17
different Light Show programs for the ultimate backyard experience. The Sync Module can drive up to 3 Hayward LED
Waterfalls.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
: BEFORE INSTALLING OR SERVICING THIS ELECTRICAL EQUIPMENT, TURN POWER SUPPLY OFF.
WARNING
: READ AND FOLLOW ALL INSTRUCTIONS IN THIS OWNER’S MANUAL AND ON THE EQUIPMENT.
FAILURE TO FOLLOW INSTRUCTIONS CAN CAUSE SEVERE INJURY AND/OR DEATH.
WARNING
: THIS PRODUCT SHOULD BE INSTALLED AND SERVICED ONLY BY A QUALIFIED PROFESSIONAL.
CAUTION
: RISK OF ELECTRICAL SHOCK, NOT TO BE INSTALLED WITHIN 10 FEET (3 METERS FOR CANADIAN
INSTALLATIONS) OF REACH PATH OF WATERS EDGE.
ATTENTION INSTALLER
: THIS MANUAL CONTAINS IMPORTANT INFORMATION ABOUT THE INSTALLATION,
OPERATION, AND SAFE USE OF THIS PRODUCT THAT MUST BE FURNISHED TO THE END USER OF THIS
PRODUCT. FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS COULD RESULT IN SERIOUS INJURY.
WARNING:
ALL ELECTRICAL WIRING MUST BE IN CONFORMANCE WITH ALL APPLICABLE LOCAL CODES,
REGULATIONS AND CANADIAN ELECTRICAL CODE (CEC). HAZARDOUS VOLTAGE CAN SHOCK, BURN AND CAUSE
DEATH OR SERIOUS PROPERTY DAMAGE. TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT USE AN
EXTENSION CORD TO CONNECT UNIT TO ELECTRIC SUPPLY.
CAUTION:
SUPPLY CIRCUIT MUST BE PROTECTED BY A GROUND FAULT CIRCUIT INTERRUPTER.