1
6E 6133.c
6E 6133.c
on
auto
off
B
A
C
D
Prog
Auto
A
B
C
D
reset
7
6
1
2
3
4
5
–
enter
on/off
clear
+
ON
OFF
ON
OFF
ON
OFF
ON
OFF
EG470
§
4 channels time switch
- weekly cycle
User instruction
´
A warranty period of 24 months is offered on hager products,
from date of manufacture, relating to any material of manufac-
turing defect. If any product is found to be defective it must be
returned via the installer and supplier (wholesaler). The warran-
ty is withdrawn if :
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary to
IEE wiring regulations and accepted practice within the industry at
the time of installation.
- the procedure for the return of goods has not been followed.
Explanation of defect must be included when returning goods.
Warranty
GB
Working principle :
The EG470 is a time switch for the automatic
control of electrical loads.
It is fully programmable with a maximum of 84
program steps to be divided between the four
channels. Each program step can be applied
to one or several days, maximising the use of
each memory location.
An input lets you simultaneously force the 4
channels to OFF.
The front cover is sealable preventing unautho-
rised access after completion of programming.
Warning :
at the beginning of use, please
reset the device in order to clear the
memory before programming.
This is achieved by using a pen to push
the reset button.
Presentation :
Display :
time
circuit status of channels A, B, C and D
(ON or OFF)
Indication of manual override on
channels A, B, C and D.
day of the week
(1 = Monday, 2 = Tuesday ....)
Indicator of operating mode :
time setting
prog
programming mode
for channels A, B, C and D
auto
running mode
timed override.
Buttons :
Manual selector to override channels
A B, C and D.
“
1
” to “
7
” selection of the days
“
clear
” : to delete a program step.
“
on/off
”: chooses whether the circuit
is on or off
“
+
” and “
-
” : changes settings
: to select the operating mode
(time setting, programming, running
mode or override)
“
enter
”: to confirm
“
reset
”
Time and day setting :
1. Press the key
repeatedly to place the cursor
below
2. Select with key “
1
” to “
7
” , the actual day
(1 = Monday, 2 = Tuesday .)
3. Input time with buttons “
+
” and “
-
”.
The override duration is adjustable from 1 hour
to 47 hours by steps of 1 hour then from 2 to
99 days by steps of 1 day.
The temporary override time period can be dif-
ferent on each channel.
Programming channel A :
1. Press the key
repeatedly to place the cursor
below “
prog
” for channel A.
2. Select with keys “
1
” to “
7
” the day(s) assigned to
this program step. An arrow appears above each
day selected.
3. Input switching time with buttons “
+
” and “
-
”.
4. Input the type of switching with button “
on/off
”
(for the first action ON is automatically proposed).
5. Enter this program step with button “
enter
”.
Program additional time settings by repeating steps
2 to 5..
Programming channels B, C and D :
Press key
to place the cursor below “
prog
” for
channels B, C or D.
Same way of programming as channel A.
Running Auto mode
The switch to automatic mode is made automati-
cally if no key is pressed for 2 minutes.
You can also select the “
auto
” mode by pressing
the key
to place the cursor below “
auto
”.
This mode is the current displaying mode.
Display of the time, the day and the state of the
four channels.
This mode does not allow any modification, except
the winter / summer time change.
Press key “
+
” or “
-
” and confirm with “
enter
”.
To check your program on channels A,
B, C or D :
1. Press the key
repeatedly to place the
cursor below “
prog
” for channel A, B, C or D.
2. Press the key “
enter
” repeatedly to display
the different program steps (switching
time, days of the week and state of the
channel ON or OFF).
To override the output :
Permanent override :
The 3 position selector (
on
-
auto
-
off
) for
channels A, B, C or D allows in automatic
mode the output to be overriden ON or OFF.
reset
7
6
1
2
3
4
5
–
enter
on/off
clear
on
auto
off
Prog Auto
+
ON OFF
ON OFF
ON OFF
ON OFF
1
5
4
7
2
3
13
8
9
10
11
12
6
B
A
C
D
A
B
C
D
reset
7
6
1
2
3
4
5
–
enter
on/off
clear
on
auto
off
B
A
C
D
Prog Auto
A
B
C
D
+
To modify or delete a program
step on channels A, B, C or D :
1. Press the key
repeatedly to place the
cursor below “
prog
” for channel A, B, C or D.
2. Press the key “
enter
” repeatedly to select
the program step to modify or to delete.
3. Modify :
- switching time with keys “
+
” or “
-
”
- days assigned with keys “
1
” to “
7
”.
- state of the channel with key “
on/off
”.
To delete a program step, press “
clear
”.
4. press “
enter
” to confirm.
3 4 5 6
2
1
L
N
EG470
14 15
7 8 9
18 19
A
A,B,C,D
C
11 12 13
B
10
D
16 17
OFF
20
Technical specifications :
Electrical characteristics :
- supply voltage : 230V ±15% 50/60 Hz
- outputs : 4 changeovers contact
μ 16 A - 250 V AC1
μ 3 A - 250 V cos
φ
= 0.6
1000 W incandescent lighting
- power consumption : 20 VA
- protection degree : IP20
- insulation class : II
Functional characteristics :
- accuracy : ± 1sec. / day at 20 °C
- operating reserve : lithium battery,
total of five years.
Environment :
Operating temperature : -10 to +50 °C
Storage temperature :
-20 to +60 °C
Connection tunnel terminals :
flexible : 0,5 to 2,5 mm
2
rigid : 0,5 to 4 mm
2
Dimensions : 5 modules
Electrical connections :
1. Press the key
repeatedly to place the
cursor below
for channel A.
2. Input with keys “
+
” or. “
-
” the override
duration.
3. Select the state of the output with key
“
on/off
”.
4. Confirm with “
enter
”.
To reset the time switch :
Press “
reset
“ to clear the program.
1. Press the key
repeatedly to place the
cursor below
for channel A, B, C or D.
2. Press “
clear
” to cancel the timed override.
3. Press the key
repeatedly to place the
cursor below “
auto
” and switch back to
automatic mode.
Timed override :
reset
7
6
1
2
3
4
5
–
enter
on/off
clear
on
auto
off
Prog Auto
+
ON
OFF
ON
ON
B
A
C
D
A
B
C
D
reset
7
6
1
2
3
4
5
–
enter
on/off
clear
on
auto
off
Prog Auto
+
ON
B
A
C
D
A
B
C
D
reset
7
6
1
2
3
4
5
–
enter
on/off
clear
on
auto
off
Prog Auto
+
ON
B
A
C
D
A
B
C
D
reset
7
6
1
2
3
4
5
–
enter
on/off
clear
on
auto
off
Prog Auto
+
ON
B
A
C
D
A
B
C
D
reset
7
6
1
2
3
4
5
–
enter
on/off
clear
on
auto
off
Prog Auto
+
OFF
B
A
C
D
A
B
C
D
To cancel the timed override on channels A,
B, C or D :
Temporary override on channel A.
The channel cursor flashes to indicate that a
timed override has been programmed. After
the duration, the program will resume its
normal course.
Temporary override on channels B, C or D.
External input for off override :
This external input lets you simultaneously force off
all 4 channels.
To activate this input, just connect the 230V phase
supply to terminal 20.
This input has priority, even if all 4 channels were
manually forced as on.
1. Press the key
repeatedly to place the
cursor below
for channels B, C or D.
2. Use the same process as for channel A.
3. Press the key
repeatedly to place the
cursor below “
auto
” and switch back to
automatic mode.
1. Move the 3 position selector for channels
A, B, C or D to “ON” or “OFF”
2. A cursor on the display (in front of
channels A, B, C or D) indicates the
permanent override.
To switch back to automatic mode, move the
selector to “
auto
”.
http://waterheatertimer.org/Hagar-timers-and-manuals.html
_________________________________________________________________________
