MODE
POWER
OUT
H3C-R
0
30
5
25
10
20
sec
A
15
ANLY
3
2
1
8
9
10
11
7
6
5
4
SOURCE
START
GATE
RESET
4
3
2
1
8
7
6
5
SOURCE
A
Set time = t , t - a < t , Reset time = Rt
SOURCE (2-7)
N.C. (8-5)
N.O. (8-6)
N.C. (1-4)
N.O. (1-3)
OUTPUT LED
POWER LED
t
t
t - a
Rt
Rt
Set time = t , t - a < t , Reset time = Rt
SOURCE (2-7)
N.C. (8-5)
N.O. (8-6)
N.C. (1-4)
N.O. (1-3)
OUTPUT LED
POWER LED
t
t
t
t
t
t - a Rt
Set time = t , t - a < t , Reset time = Rt
0.5s
0.5s
SOURCE (2-7)
N.C. (8-5)
N.O. (8-6)
N.C. (1-4)
N.O. (1-3)
OUTPUT LED
POWER LED
t
t
Rt
Rt t - a
Set time = t , t - a < t , Reset time = Rt
Rt
t
0.6s
0.6s
0.6s
t
t
t
0.6s
t - a
SOURCE (2-7)
N.C. (8-5)
N.O. (8-6)
N.C. (1-4)
N.O. (1-3)
OUTPUT LED
POWER LED
Set time = t , t - a < t , Reset time = Rt
SOURCE (2-7)
N.C. (1-4, 8-5)
N.O. (1-3, 8-6)
OUTPUT LED
POWER LED
t
t
t
t
t
t - a Rt
Set time = t , t - a < t , Reset time = Rt
SOURCE (2-7)
N.C. (1-4, 8-5)
N.O. (1-3, 8-6)
OUTPUT LED
POWER LED
t
t
t - a
Rt
Rt
Set time = t , t - a < t , Reset time = Rt
SOURCE (2-7)
N.C. (8-5)
N.O. (8-6)
N.C. (1-4)
N.O. (1-3)
OUTPUT LED
POWER LED
t
t
t - a
Rt
Rt
Set time = t , t - a < t , Reset time = Rt
SOURCE (2-7)
N.C. (1-4, 8-5)
N.O. (1-3, 8-6)
OUTPUT LED
POWER LED
t
t
t - a
Rt
Rt
P r o d u c t i s s u b j e c t t o c h a n g e w i t h o u t n o t i c e .
A
:
ON delay (2C)
A
4 :
ON delay (1A1C)
C
:
Interval (2C)
B
3 :
Repeat cycle ON start (1A1C)
E
:
Interval (1A1C)
J
:
One shot output (1A1C)
B
:
Repeat cycle OFF start (2C)
B
4 :
Repeat one shot output (1A1C)
CONNECTION
BASIC SETTING
Mode Window
Groove for
screwdriver
Mode Selector
Scale Selector
Setting Operation Mode
Turn the Mode Selector with a screwdriver in either
clockwise or counter-clockwise direction until the
desired operation mode (A, A
4
, B, B
3
, B
4
, C, E, or J) is visible through the Mode Window. Make sure
the selector snaps into a secured position, not between two modes.
Setting Time Scale
Turn the Scale Selector with a screwdriver and the time scale will cycle through all values.
Stop when the desired scale range (1.2, 3, 12, 30) and the scale unit (sec, min, hrs, 10h) are visible
through the Scale Range Windows and the Scale Unit Window respectively.
Clockwise turns increment the time scale; counter-clockwise turns decrement the scale.
Make sure the selector snaps into a secured position, not between two scales.
Operating voltage
Allowable operating
voltage range
Rated frequency
Contact rating
Reset time
Power consumption
Life
Ambient temperature
Ambient humidity
Weight
Mechanical : 5,000,000 times / Electrical : 100,000 times
85 ~ 110% of rated operating voltage
50 / 60Hz
MAX 0.1s
250VAC 5A (Resistive load)
Approx. 3VA
-10
～
+50
o
C
MAX 85% RH
Approx. 100g
AC/DC : 24
～
240V
NAMES AND FUNCTIONS OF FACEPLATE
SPECIFICATIONS
Mode Selector
Mode Window
Scale Selector
Scale Range Windows
Scale Unit Window
LEDs
Time Dial
POWER: Power indicator(Flashes
when Timer operates; lit when
Timer stops operating)
OUT: Output indicator(Lit when
output is ON)
This manual uses the following symbols to ensure safe operation of this timer.
to user.
MULTI-FUNCTION
ANALOGUE TIMER
User's Manual
SAFETY PRECAUTION
WARNING
CAUTION
Warnings are indicated when mishandling this product might result in death or serious injury
Cautions are indicated when mishandling this product might result in minor injury to the user,
or only physical damage to the timer.
‧
Note this incorrect wiring of this product can damage it and lead to other hazards. Make sure the product has
been correctly wired before turning the power ON.
‧
Before wiring, or removing / mounting the product, be sure to turn the power OFF. Failure to do so might cause
electric shock.
‧
Do not touch electrically charged parts such as the power terminals. Doing so might cause electric shock.
‧
Do not disassemble the product. Doing so might cause electric shock or faulty operation.
‧
Use the product within the operating ranges recommended in the specification (temperature, humidity, voltage,
shock, mounting direction, atmosphere etc.). Failure to do so might cause fire or faulty operation.
‧
Firmly tighten the wires to the socket. Insufficient tightening of the wires to the socket might cause fire.
WARNING
CAUTION
RESTRICTIONS ON USE
When using this product in applications
that require particular safety or when
using this product in important facilities,
please pay attention to the safety of the
overall system and equipment. Install fail-
safe mechanisms, perform redundancy
checks and periodic inspections and
adopt other appropriate safety measures
when it is necessary. This product is rated
at Class
Ⅱ
.
Meraserw-5 s.c. 70-312 Szczecin , ul.Gen.J.Bema 5 , tel.(91)484-21-55 , fax (91)484-09-86 , e-mail: [email protected] , www.meraserw.szczecin.pl
H3C-R
8 / H3C-R11
H3C-
R8
H3C-R11
TIMING CHART(Output mode) for H3C-R
8
