FEATURES
Speaks Time and Temperature
Asseccory Holder
Alarm Clock
Lighted Picture Frame
The DF-70 Talking Time / Temperature Alarm Clock and
Accessory Holder. It tells you the time in a clear voice at
the push of a button. Accessory compartment allows you
to store your glasses, cell phone, pens or pencils..etc
The picture frame also lights when items
are placed in accessory compartment
Talking Time /Temperature Accessory Holder
DF-70
CARE AND MAINTENANCE
Keep the calculator dry. If it gets wet, wipe it dry before use.
Do not use harsh solvents or detergents to clean.
Replace with 389 battery
www.datexx.com
TELEDEX Limited U.S.A. Warranty
TELEDEX INC. warrants these products to the original purchaser to
be free from defective material and workmanship. The product will
be repaired or replaced at our option, for up to one year when
returned with proof of purchase to the address below. Include a
check or money order for $3.00 to cover postage.
TELEDEX INC. 1 Atlas st. Kenilworth, NJ 07033
Warranty valid only in the U.S.A.
Printed in China 5/00
2
BATTERY REPLACEMENT
PM
HO
UR
LY
TIME SET
HO
UR
M
IN
TALK
CH
IM
E
PICTURE
Save Battery Power
• Turn off Chime and
Alarm when not used.
• When voice slows,
replace Batteries.
Set the Time
1. Press SET.
2. Press HR and MIN to adjust time.
The time is spoken.
3. Press SET twice.
Set the Alarm
1. Press SET twice.
2. Press HR and MIN to adjust
alarm time.
3. Press iTALK button to choose a
Chirping or Beeping sound.
4. Press SET.
5. Press ALARM to turn on Alarm.
When Alarm sounds:
Press iTALK button to snooze,
Press iTALK button twice to stop alarm.
Hourly Chime
Press CHIME for an
hourly time and
temperature report.
REMOVING PICTURE
PICTURE
1. Slide plastic cover up.
1.
2. Then Slide picture a plastic backing
to the side
Picture
2.
3. Then replace cover
3.
PICTURE
1.Remove cover from the Bottom
of Clock.
2. Replace using 3 AA Batteries
according to Polarity Symbols
3. Then slide cover back on
AA
AA
AA
RESET FEATURE
If at any time the Clock freezes,Located the reset button on
bottom.
Use a unraveled paper clip or toothpick to push the
button.(since the actual button in located inside the cover).
It will reset all functions
