CUBISCAN 110-T SETUP
QUICK REFERENCE GUIDE
UNPACKING
SETTING UP THE BACK PANEL
This quick reference guide provides instructions for
assembling and setting up the Cubiscan 110-T. For more
detailed instructions on setting up the Cubiscan 110-T,
see the
Cubiscan 110-T Operations and Technical Manual.
1 Remove the top of the crate.
2 Remove the screws holding the wood packing bar
in place, and remove the wood bar from the crate.
1 Remove the four screws from the back of the Cubiscan 110-T.
2 Lift the back panel into its upright position, making sure not to constrict the three
sensor cables protruding from the back of the scale plate.
3 Remove the packing material from around the
Cubiscan 110-T.
4 Carefully lift the Cubiscan 110-T from the crate (this
may require two people).
801.451.7000
cubiscan.com
Continued on back
Screws
Wood packing
bar
