Operation Manual
Wireless Electronic Door Lock
CM-DL1702
Introduction
Thank you for choosing the COMAX’s Wireless door lock. This lock is a Z-Wave enabled device and is fully
compatible with Z-Wave
Every main powered Z-Wave enabled device acts as a signal repeater and multiple devices result in more possible
transmission routes.
Product Description and Specification
Specification:
Protocol: Z-Wave
Frequency Range:
868.42MHz (EU)
908.42MHz (US)
921.42MHz(AU)
Operating Range: Up to 50M line of sight
Operating Temp.: -10°C to 50°C
Battery: 4pcs x AA Batteries
Operation
1.
Insert the Batteries, make sure of the polarity is as mentioned.
2.
For
adding to a network: Select the Z-Wave Interface Controller into including mode, and follow the
instruction to add the CM-DL1702 into your controller. The distance between CM-DL1702 and controller is
suggested to be in one meter. Press Keypads
©
manually turn the Piece from inside. User
shall hear one long beep sound and controller shall indicate device is successfully included into network.
Process will take approximately 2 minutes.
3. For removing from a network: Set up the Z-Wave Interface Controller into exclusion mode, and follow the
instruction to delete the CM-DL1702 from your controller. Press Keypads
©
manually
Turn Piece from inside to be excluded.
4. For “Association”: the Z-Wave Interface Controller set “Association”, and Follow its instruction to associate
the CM-DL1702 with other device.
