background image

PMD8137CIR020306-222

Models: PMD8137 

PMD8142

18 Volt 

Circular Saw

Owner’s Manual

TEAM PRODUCTS INTERNATIONAL INC. Limited Warranty

WhAT IS COvERED:

 Any defect in materials and workmanship.

FOR hOW LONg:

 2 years from date of purchase.

WhAT WE WILL DO:

 If your product is defective and returned within 30 days 

after the date it was purchased, we will replace it at no charge to you. If 

returned after 30 days but within 2 years of the date of purchase we will 

repair it or, at our option, replace it at no charge to you.
If we repair your product, we may use new or reconditioned replacement 

parts. If we choose to replace your product, we may replace it with a  

new or reconditioned one of the same or similar design. The repair or  

replacement will be warranted under our standard 2 year warranty.

LIMITATIONS: IMPLIED WARRANTIES, INCLUDINg ThOSE OF FITNESS FOR A 

PARTICULAR PURPOSE AND MERChANTAbILITy (AN UNWRITTEN WARRANTy 

ThAT ThE PRODUCT IS FIT FOR ORDINARy USE), ARE LIMITED TO 2 yEARS 

FROM DATE OF PURChASE. WE WILL NOT PAy FOR LOSS OF TIME, INCONvE-

NIENCE, LOSS OF USE OF yOUR PRODUCT OR PROPERTy DAMAgE CAUSED 

by yOUR PRODUCT OR ITS FAILURE TO WORk, OR ANy OThER INCIDENTAL 

OR CONSEqUENTIAL DAMAgES INCLUDINg PERSONAL INjURy.

Some states do not allow limitations on how long an  implied warranty 

lasts or the exclusion or limitation of incidental or consequential damages, 

so the above exclusions or limitations may not apply to you.

WhAT WE ASk yOU TO DO:

 To get warranty service for your product,  

you must provide proof of the date of purchase. Within 30 days of the 

date it was purchased, return your product to your place of purchase for 

immediate replacement.  After 30 days, but before the end of the 2 year 

warranty period, you may return the product to the following address:
  

Team Products International

 

Attn: Customer Service Returns

 

35 A Continental Drive

 

Wayne, Nj 07470

We suggest that you retain your original packing material in the event 

you need to ship your product. When sending your product include your 

name, address, phone number, proof of date of purchase, and a  

description of the operating problem. After repairing or replacing your 

product, we will ship it to your home or office within four weeks.

WhAT ThIS WARRANTy DOES NOT COvER:

 Among oTher ThIngS ThIS  

WArrAnTy doeS noT cover defecTS reSulTIng from AccIdenTS, 

dAmAge WhIle In TrAnSIT To our ServIce locATIon, AlTerATIonS, 

unAuThorIzed repAIr, fAIlure To folloW InSTrucTIonS, mISuSe, fIre, 

flood, And AcTS of god. If your producT IS noT covered by our 

WArrAnTy, cAll our cuSTomer ServIce number AT (888) 231-4022 To 

deTermIne WheTher We WIll repAIr your producT And oTher repAIr 

InformATIon, IncludIng chArgeS. We, AT our opTIon, mAy replAce 

rATher ThAn repAIr your producT WITh A neW or recondITIoned 

one of The SAme or SImIlAr deSIgn. The repAIr or replAcemenT WIll 

be WArrAnTed for 2 yeArS.
ThIS lImITed WArrAnTy IS The only one We gIve on your producT, 

And IT SeTS forTh All our reSponSIbIlITIeS regArdIng your producT. 

There Are no WArrAnTIeS WhIch exTend beyond The deScrIpTIon SeT 

forTh Above.

STATE LAW RIghTS:

 This warranty gives you specific legal rights and you 

may also have other rights which may vary from state to state.

©2006  The Coleman Company, Inc.  All rights reserved.  

COLEMAN® and                   are registered trademarks of  The Coleman Company, Inc., used under license.

Designed in the USA and custom-manufactured in China for  Team Products International Inc.

Distributed by  Team Products International Inc., Mountain Lakes, NJ  07046.

Summary of Contents for PMD8137









Reviews: