User’s Guide
This cable is made with high-quality, wear-resistant insulated wires. It connects your Cyclone battery pack
to your flash unit in order to power the flash. It is also compatible with other major battery pack brands,
including Quantum, Lumedyne, Dynalite, and Impact.
Warnings
Use only as instructed. Both terminal connectors output high voltage.
Connect your flash unit to your battery pack only with a cable that is designed to be compatible with them.
Do not use if any wire is exposed as a result of damage or wear.
Keep out of reach of children.
Make sure the cable is firmly connected at both ends when using your battery pack.
Unplug this cable from the sockets on the battery pack and the flash unit when it is not in use.
Connecting Your Cyclone Battery Pack to Your Flash
1. Plug the 5-pin metal connector of the cable firmly into the multifunction socket
on the Cyclone.
2. Plug the other end of the cable securely into the
compatible power port on your flash unit.
Cyclone Flash Cable
1
2
