Instructions
Patch Cable
3A2796A
EN
Patch cable used with G3 pump to power vent valve accessory.
Part No.: 24N351
Patch Kit Parts
▲
Replacement Danger and Warning labels, tags and
cards are available at no cost.
Important Safety Instructions
Read all warnings and instructions in this
manual and in the G3 Pump instruction man-
ual.
Save all instructions.
Description
Qty
CABLE Accessory
1
▲
TAG, warning
1
ELECTRIC SHOCK HAZARD
This equipment must be grounded
.
Improper ground-
ing, setup, or usage of the system can cause electric
shock.
If the plug is not correctly connected to the G3 pump as
shown in F
. 1, the user could be seriously injured due
to electric shock and/or the pump could be significantly
damaged
•
Turn off and disconnect power at main switch before
disconnecting any cables and before servicing
equipment.
•
Connect only to grounded power source.
•
All electrical wiring must be done by a qualified elec-
trician and comply with all local codes and regula-
tions.
F
IG
. 1
2
1
1 LINE
2 NEUTRAL
3 Not Used
4 GROUND
(2)
(4)
(1)
(3)
Connector on G3 housing
Patch Cable
4
