1
Standard Features:
Two 4-Button Remote Transmitters
Status indicator (LED)
Valet / override switch
Multi-tone siren (115dB)
Dual stage impact detector
Flashing parking lights
Remote panic
Remote sensor bypass
Passive or active arming
Anti-carjacking mode
Optional Features:
Starter disable
Keyless entry
Auxiliary Function
2nd Auxiliary Function
Remote trunk or hatch release
Illuminated entry
Hood and trunk protection
Remote auto start
Power window roll up
Back-up battery w/charging circuit
Perimeter sensor
Note:
Some features may require additional
parts and labor, and may not be appropriate for
certain vehicles. Consult your authorized dealer.
System Operation
ARMING OPERATION
To arm the system press transmitter button 1:
• The siren will chirp once.
• The parking lights will flash once.*
• The doors will lock.*
• The LED will start flashing within 5
seconds and the system will be armed.
After Arming, if a bad sensor or an open
zone is detected, the siren will chirp and the
parking lights will flash 4 times to indicate a
zone is open. The system will ignore that
input, keeping all other areas protected.
While Armed, the system will trigger if:
• The doors are opened.
• The shock sensor detects an impact.
• The hood or trunk is opened.
When triggered, the siren will soundand the
parking lights will flash* for 50 seconds.
If the same input triggers the system 3 times
during a single arming cycle, the system will
bypass that input, keeping other zones
protected, until the next arming cycle.
If the shock sensor detects a light impact to
the vehicle, the siren will chirp and the
parking lights will flash 3 times to warn away
the potential intruder.
*
Optional Feature
PASSIVE ARMING
The passive arming feature allows the system
to arm itself automatically without user
intervention.
The Passive Arming feature may be
enabled during installation.
1 RELAY / 4 BUTTON SERIES
VEHICLE SECURITY SYSTEM
Button 1
Button 2
Button 3
Button 4
Transmitter styles may vary
BW2450.qxd 6/11/2009 4:12 PM Page 1
