background image

1

Standard Features:

Two 5-Button Remote Transmitters

Status indicator (LED)

Valet / override switch

Multi-tone siren

Dual stage impact sensor

Remote panic

Remote chirp mute 

Remote sensor bypass

Passive or active arming

Optional Features:

Flashing parking lights

Starter disable 

Keyless entry

Remote trunk or hatch release

Illuminated entry

Hood and trunk protection

Remote auto start

Power window roll up

Glass break sensor

Microwave sensor

Note:

Some features may require additional

parts and labor, and may not be appropriate for

certain vehicles. Consult your authorized dealer.

System Operation

ARMING OPERATION

To arm the system press transmitter button 1:

• The siren will chirp once.

• The parking lights will flash once.*

• The doors will lock.*

• The LED will turn solid for 10 seconds

then start flashing slowly. After 10

seconds the system is armed.

After Arming, if the system detects a bad

sensor or an open zone, the siren will chirp

and the parking lights will flash 4 times to

indicate a zone is open. The system will

ignore that input, but keep all other areas

protected.
While Armed, the system will trigger if:

• The doors are opened.

• The shock sensor detects an impact.

• An optional sensor is disturbed.

• The hood or trunk is opened.

When triggered by the door or hood/trunk

input the siren will sound, the horn will

honk, and the parking lights will flash for 45

seconds. If triggered by a sensor, the alarm

cycle will last 30 seconds.
If the same input triggers the system 3 times

during a single arming cycle, the system will

bypass that input, keeping the other zones

protected, until the next time the system is

armed.
If the shock sensor detects a light impact to

the vehicle or an optional sensor is

disturbed, the system will chirp and the

parking lights will flash 5 times to warn away

the potential intruder.

*

Optional Feature

6R / 5-BUTTON SERIES

VEHICLE SECURITY SYSTEM

Button

1

Button

2

Button

5

Button

3

Button

4

BW3750 new size.qxd  4/14/2004  9:09 AM  Page 1

Summary of Contents for 5-BUTTON SERIES













Reviews: