ZyXEL Communications ZyXEL Prestige 660R, User Manual

Page: 144 / 297

Prestige 660R ADSL 2+ Access Gateway
17-4 Internet Access
17.5 Route IP Setup
The first step is to enable the IP routing in Menu 1 — General Setup .
To edit menu 1, type 1 in the main menu and press [ ENTER ]. Set the Route IP field to Yes by pressing
[
SPACE BAR
].
Figure 17-5 Menu 1 General Setup
17.6 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in menu 11. Before you configure your Prestige for
Internet access, you need to collect your Internet account information.
Use the Internet Account Information table in the Read Me First to record your Internet account information.
Note that if you are using PPPoA or PPPoE encapsulation, then the only ISP information you need is a login
name and password. You only need to know the Ethernet Encapsulation Gateway IP address if you are using
ENET ENCAP encapsulation.
From the main menu, type 4 to display Menu 4 - Internet Access Setup , as shown next.
Menu 1 - General Setup
System Name= ?
Location= location
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel: