ZyWALL SSL 10 Support Notes
82
All contents copyright (c) 2006 ZyXEL Communications Corporation.
Step4.
Allow NetBIOS between WAN and DMZ, DMZ and LAN, LAN and WAN
1) Go to menu
Network
>
LAN
, to enable Windows Networking (NetBIOS over TCP/IP)
“
Allow between LAN and WAN1
” and “
Allow between LAN and DMZ
”. Click
Apply
button.
2) Switch to menu
Network > DMZ,
to enable Windows Networking (NetBIOS over
TCP/IP) “
Allow between DMZ and WAN1
” and “
Allow between DMZ and LAN
”. Click
Apply
button.
Step5.
Create one static route for Full tunnel mode access. (Only for Full tunnel mode users
and when they need to access internal application servers by themselves. That is access
those server NOT through ZyWALL SSL10 portal.)
1) Go to menu
Advanced
>
Static Route
, click the modify icon to add a static route.
Summary of Contents for ZyWALL SSL 10
Page 13: ...ZyWALL SSL 10 Support Notes 13 All contents copyright c 2006 ZyXEL Communications Corporation ...
Page 36: ...ZyWALL SSL 10 Support Notes 36 All contents copyright c 2006 ZyXEL Communications Corporation ...
Page 55: ...ZyWALL SSL 10 Support Notes 55 All contents copyright c 2006 ZyXEL Communications Corporation ...