ZyXEL Communications ZyWALL SSL 10 Support Notes Download Page 99

Page: 99 / 102

ZyWALL SSL 10 Support Notes

B. Firmware Upgrade FAQ

B01. How to perform the firmware upgrade on ZyWALL SSL10?

It could be done by web GUI(menu

Maintenance

Firmware

) or by FTP (ftp to the

ZyWALL SSL10’s IP address ex.

ftp://192.168.1.1

and upgrade the firmware by using

command “put 1.00(AQH.0)C0.bin ras” which the “1.00(AQH.0)C0.bin” is the firmware

file name. After firmware upgrade, the system will restart to take the new firmware effect.

C. Registration for Service Activation FAQ

C01. Why do I have to register?

If you wanted to use the free SSL-VPN of ZyWALL, your have to activate it from

within myZyXEL.com. After activating, it will allow up to 10 users to login via SSL

connection.

If you purchased iCard for a security service, you must activate the security service

from within myZyXEL.com. You could upgrade the license to allow up to 25 users to

C02. In addition to registration, what can I do with myZyXEL.com?

1. Access firmware and security service updates.

2. Get ZyWALL alerts on services, firmware, and products.

3. Manage (activate, change or delete) your ZyWALL security services online.

In summary, myZyXEL.com delivers a convenient, centralized way to register all your

ZyWALL security appliances and security services. It eliminates the hassle of registering

individual ZyWALL appliances and upgrades to streamline the management of all your

ZyWALL security services.

Instead of registering each ZyWALL product individually, using myZyXEL.com you have a

Summary of Contents for ZyWALL SSL 10







































































































Search results

Summary of Contents for ZyWALL SSL 10

Reviews:

Related manuals for ZyWALL SSL 10

Brands by name

Popular brands

ZyXEL Communications ZyWALL SSL 10, Support Notes

Search results

Summary of Contents for ZyWALL SSL 10

Reviews:

Related manuals for ZyWALL SSL 10

Brands by name

Popular brands