![background image](http://html1.mh-extra.com/html/zyxel-communications/zywall-ssl-10/zywall-ssl-10_support-notes_943794063.webp)
ZyWALL SSL 10 Support Notes
63
All contents copyright (c) 2006 ZyXEL Communications Corporation.
5)
On peer VPN gateway, use the public
WAN IP address of NAT Router
as the “
Remote
Gateway Address
” of Gateway Policy rule.
The ID must be consistent no matter if IP/DNS/EMAIL is used. So long as if the ID Type
and content are consistent on both VP entities.
Configure Port Forwarding rule for SSL VPN traffic on the ZyWALL A
1)
Go to the GUI menu
ADVANCED
>
NAT
>
Port Forwarding
, add one rule to
forward port 443 traffic to the ZyWALL SSL 10 (192.168.3.2)
2). Go to the GUI > ADVANCED > REMOTE MGMT > WWW, change the ZyWALL
UTM’s HTTPS management port number from port 443 to another port number (ex. 10443).
This is to make sure all HTTPS traffic via port 443 will be forwarded to ZyWALL SSL 10.
But when IT staff needs to access the ZyWALL UTM by HTTPS, they can use
https://IP_address:10443
(which the IP_address could be the ZyWALL’s LAN or DMZ or
WAN IP address depending on server access setting).
Summary of Contents for ZyWALL SSL 10
Page 13: ...ZyWALL SSL 10 Support Notes 13 All contents copyright c 2006 ZyXEL Communications Corporation ...
Page 36: ...ZyWALL SSL 10 Support Notes 36 All contents copyright c 2006 ZyXEL Communications Corporation ...
Page 55: ...ZyWALL SSL 10 Support Notes 55 All contents copyright c 2006 ZyXEL Communications Corporation ...