manualshive.com logo in svg

ZyXEL Communications ZyAIR G-220, User Manual

The ZyXEL Communications ZyAIR G-220 wireless adapter is a high-performance device that allows you to connect your computer or laptop to Wi-Fi networks. To get the most out of this product, make sure to download the user manual for free from manualshive.com, where you can easily find and download the manual in just a few clicks.

Share
Download
background image

 

 

ZyAIR G-220 User’s Guide 

Setting Up Your Computer’s IP Address 

 

C 

1. 

Click the 

IP Address

 tab. 

-If your IP address is dynamic, select 

Obtain an 

IP address automatically

.  

-If you have a static IP address, select 

Specify 

an IP address

 and type your information into 

the 

IP Address

 and 

Subnet Mask

 fields. 

 

2.  

Click the 

DNS

 Configuration tab. 

-If you do not know your DNS information, select 

Disable DNS

. 

-If you know your DNS information, select 

Enable DNS

 and type the information in the 

fields below (you may not need to fill them all 
in). 

 

 

 
 

Summary of Contents for ZyAIR G-220




































































Reviews:

No comments

Related manuals for ZyAIR G-220

Vicon IQeye IQM-GBA Alliance-mx Installation Instructions preview
IQeye IQM-GBA Alliance-mx
Brand: Vicon Pages: 2
Sennheiser BTD 300i Instruction Manual preview
BTD 300i
Brand: Sennheiser Pages: 59
Solisto Solisto.Home User Manual preview
Solisto.Home
Brand: Solisto Pages: 12
Buffalo AirStation WLI-USB-KB11 User Manual preview
AirStation WLI-USB-KB11
Brand: Buffalo Pages: 45
Wyze WLPPO1 Instruction Manual preview
WLPPO1
Brand: Wyze Pages: 4
Sony MSAC-US30 - Memory Stick USB Reader/Writer Operating Instructions Manual preview
MSAC-US30 - Memory Stick USB Reader/Writer
Brand: Sony Pages: 790
Techly IPW-USB-21AMBK Quick Start Manual preview
IPW-USB-21AMBK
Brand: Techly Pages: 2
Techly IADAP USB31-HDMI User Manual preview
IADAP USB31-HDMI
Brand: Techly Pages: 4
Techly 8051128107401 User Manual preview
8051128107401
Brand: Techly Pages: 16
GridConnect CAN232 FD User Manual preview
CAN232 FD
Brand: GridConnect Pages: 47
ActionTec 802URG User Manual preview
802URG
Brand: ActionTec Pages: 13
ActionTec 802CAG User Manual preview
802CAG
Brand: ActionTec Pages: 9
ActionTec 14 Mbps HomePlug Ethernet Adapter User Manual preview
14 Mbps HomePlug Ethernet Adapter
Brand: ActionTec Pages: 55
Bplus Technology MP2A User Manual preview
MP2A
Brand: Bplus Technology Pages: 16
Cabletime CT-AV586-01G(4k)-B0.2 Quick Start Manual preview
CT-AV586-01G(4k)-B0.2
Brand: Cabletime Pages: 2
Directed Electronics VA200 Installation Manual preview
VA200
Brand: Directed Electronics Pages: 1
3Com OfficeConnect 3CRWE254G72 User Manual preview
OfficeConnect 3CRWE254G72
Brand: 3Com Pages: 54
Volkswagen VAS 6558A/41 Operating Manual preview
VAS 6558A/41
Brand: Volkswagen Pages: 16

Brands by name

Popular brands

Load more brands