ZyXEL Communications ZyAIR G-2000 Plus, User Manual

Page: 277 / 430

ZyAIR G-2000 Plus User’s Guide
Chapter 24 Internet Access 276
24.3 Configuring the PPTP Client
To configure a PPTP client, you must configure the My Login and Password fields for a PPP
connection and the PPTP parameters for a PPTP connection.
After configuring My Login and Password for PPP connection, press [
SPACE BAR]
and
then [ENTER] in the Encapsulation field in Menu 4 -Internet Access Setup to choose
PPTP
as your encapsulation option. This brings up the following screen.
IP Subnet Mask Enter the subnet mask associated with your static IP.
Gateway IP Address Enter the gateway IP address associated with your static IP.
Network Address
Translation
Network Address Translation (NAT) allows the translation of an Internet
protocol address used within one network (for example a private IP address
used in a local network) to a different IP address known within another
network (for example a public IP address used on the Internet).
Choose
None to disable NAT.
Choose SUA Only if you have a single public IP address. SUA (Single User
Account) is a subset of NAT that supports two types of mapping: Many-to-
One and Server .
Choose Full Feature if you have multiple public IP addresses. Full Feature
mapping types include: One-to-One , Many-to-One (SUA/PAT), Many-to-
Many Overload , Many- One-to-One and Server . When you select Full
Feature you must configure at least one address mapping set!
Please see the NAT chapter for a more detailed discussion on the Network
Address Translation feature.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Table 92 Internet Access Setup (Ethernet (continued)
FIELD DESCRIPTION
Note: T
he ZyAIR supports only one PPTP server connection at any
given time