ZyXEL Communications ZyAIR G-2000 Plus, User Manual

Page: 256 / 430

ZyAIR G-2000 Plus User’s Guide
255 Chapter 20 Introducing the SMT
After you enter the password, the SMT displays the main menu, as shown next.
Move to a “hidden”
menu
Press [SPACE BAR]
to change No to Yes
then press [ENTER].
Fields beginning with “Edit” lead to hidden menus and
have a default setting of No . Press [SPACE BAR] once to
change No to Yes , then press [ENTER] to go to the
“hidden” menu.
Move the cursor [ENTER] or [UP]/
[DOWN] arrow keys.
Within a menu, press [ENTER] to move to the next field.
You can also use the [UP]/[DOWN] arrow keys to move to
the previous and the next field, respectively.
Entering information Type in or press
[SPACE BAR], then
press [ENTER].
You need to fill in two types of fields. The first requires you
to type in the appropriate information. The second allows
you to cycle through the available choices by pressing
[SPACE BAR].
Required fields <
?
> or ChangeMe All fields with the symbol <?> must be filled in order to be
able to save the new configuration.
All fields with
ChangeMe must not be left blank in order to
be able to save the new configuration.
N/A fields <N/A> Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
Save your
configuration
[ENTER] Save your configuration by pressing [ENTER] at the
message “Press ENTER to confirm or ESC to cancel”.
Saving the data on the screen will take you, in most cases
to the previous menu.
Exit the SMT Type 99, then press
[ENTER].
Type 99 at the main menu prompt and press [ENTER] to
exit the SMT interface.
Table 82 Main Menu Commands
OPERATION KEYSTROKE DESCRIPTION