![background image](http://html1.mh-extra.com/html/zyxel-communications/zonedas/zonedas_user-manual_943563023.webp)
Chapter 2: First Time Installation
ZoneDAS User Guide
Page | 23
Next, mouse to
System
on the
Navigation Panel
, and click
SNMP
from the menu. This opens
the
SNMP Screen
, as shown below:
Figure 18
ZoneDAS SNMP screen
The
SNMP screen
has 3 sections for setting up remote management: General Settings, Trap
Destination, and SNMP v3 Settings. ZoneDAS supports all SNMP specifications, up to version
3. Simply enter the appropriate information for each of the fields, skipping SNMP v3 Settings
if only SNMP version 2 is being used. Once the correct parameters have been entered, click
Apply
and central management setup is complete.
Note: To make SNMP work, it is necessary to have an Administrator password that has 8
characters or more. The default Administrator password only has 4 characters. To change
the Administrator password, please refer to Chapter 9.4,
2.3.12 Save Settings
ZoneDAS is now set up! Please save all the settings that have been made over the previous
steps, and backup everything to a configuration file.
Saving settings is easy: simply click on the Save button on the top right of any screen. The
Save button looks like this:
Figure 19
The Save button
If Save is not clicked, all updated settings will exist only in volatile memory and will
disappear upon system reboot.
Once Save is selected, the current settings will transfer to the system’s non-volatile memory
and still exist after power off or reboot
.