manualshive.com logo in svg

ZyXEL Communications XGS-4528F, User Manual, Page: 217 / 491

Share
Download
ZyXEL Communications XGS-4528F User Manual Download Page 217

 Chapter 22 Queuing Method

XGS-4526/4528F/4728F User’s Guide

217

22.2  Configuring Queuing 

Click Advanced Application > Queuing Method in the navigation panel.

Figure 93   

Advanced Application > Queuing Method 

The following table describes the labels in this screen.  

Table 55   

Advanced Application > Queuing Method 

LABEL

DESCRIPTION

Port

This label shows the port you are configuring.

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use 
this row first to set the common settings and then make adjustments on a 
port-by-port basis. 

Note: Changes in this row are copied to all the ports as soon as you make 

them.

Summary of Contents for XGS-4528F












































































































































































































































































































































































































































































































Reviews:

No comments