manualshive.com logo in svg

ZyXEL Communications XGS-4528F, User Manual, Page: 122 / 491

Share
Download
ZyXEL Communications XGS-4528F User Manual Download Page 122

Chapter 9 VLAN

XGS-4526/4528F/4728F User’s Guide

122

9.5.2  VLAN Details

Use this screen to view detailed port settings and status of the VLAN group. See 

Section 9.1 on page 117

 for more information on static VLAN. Click on an index 

number in the VLAN Status screen to display VLAN details.

Figure 40   

Advanced Application > VLAN > VLAN Detail

The following table describes the labels in this screen.

9.5.3  Configure a Static VLAN    

Use this screen to configure and view 802.1Q VLAN parameters for the Switch. 
See 

Section 9.1 on page 117

 for more information on static VLAN. To configure a 

Table 17   

Advanced Application > VLAN > VLAN Detail 

LABEL

DESCRIPTION

VLAN Status

Click this to go to the VLAN Status screen.

VID

This is the VLAN identification number that was configured in the Static 
VLAN screen.

Port Number

This column displays the ports that are participating in a VLAN. A tagged 
port is marked as T, an untagged port is marked as U and ports not 
participating in a VLAN are marked as “–“. 

Elapsed Time  This field shows how long it has been since a normal VLAN was registered 

or a static VLAN was set up.

Status

This field shows how this VLAN was added to the Switch; dynamic - using 
GVRP, static - added as a permanent entry or other - added in another 
way such as via Multicast VLAN Registration (MVR).

Summary of Contents for XGS-4528F












































































































































































































































































































































































































































































































Reviews:

No comments